The UNI8 structure is built entirely in galvanised steel and fitted with a rod with an 8-branch head.
This support is used both in the stringerless type and in the version with stringers. This structure is available in four versions: Light, Medium, Heavy and Diagonal.
The main feature of the UNI8 is its head which enables the simultaneous use of both right-angled stringers and stringers which are arranged diagonally, therefore increasing the stability and mechanical load bearing of the floor. The head is particularly compact and features 8 branches: four for the L and M type stringers and four for the P and D type. All of the stringers are interchangeable. The upper surface of the structure is covered with plastic gaskets in order to improve sound absorbtion and make it airtight.
The advantages of the UNI8 model are: its performance, the variety of solutions available, its compact structure, the speed and ease of installation; the possibility of reducing the height of the floor directly on-site by simply cutting the tube without compromising any of its features, the “snap-on” system (present in the L and M stringer versions) which enables a particular conformation at the edges resulting in simple and correct assembly and the locking of the stringers before the final screwing.

The UNI4 structure, which consists entirely of galvanized steel, has an innovative 4-branch head to which the stringers can be attached. This support is used both in stringerless and stringered versions. There are different configurations available depending on the different load conditions: Light or Medium with an open section and Heavy and H with a closed section. The upper surface of the structure is covered with plastic gaskets in order to improve sound absorbtion and make it airtight.
The advantages of the UNI4 model are: its compact structure, the speed and ease of installation, the wide height adjustment range which allows a large range of adaptation in the height of the floor slab, the “snap-on” system (present in the L and M stringer versions) which enables a particular conformation at the edges resulting in simple and correct assembly and the locking of the stringers before the final screwing.